Plot construction is
realized on the basis of the data received in the calculation process.
After the end of calculation (reaching the right border of the integration
interval or interrupting the calculation by pressing a toolbar button
there is an opportunity to change the constructed plot scale (the
change of scale mode toolbar button .
To increase the scale it is necessary to pull the mouse from top to
bottom, to come back to the initial scale - from bottom to top) or
to move the constructed plot (the drag mode button ).
allows to remove / display a grid.
- this button changes the plot updating mode step by step or at the
- this button changes the plot color in a random mode.
- solving some problems (as an example see the
Unstable area/sector and the pictures below) the method gives
not the precise solution itself, but the area in which this solution
is. With the help of this button this area can be hidden.
button allows to hide or to show the dynamics of a calculation step
change (vertical lines above the plots)..
Choosing the “Plots->Plots properties” menu item or
pressing the button
you’ll see a dialog window in which you can change the format
of the plots shown on the screen. If you want to hide a plot, remove
the check from the corresponding switcher:
YMin– the minimum value
in Y direction. YMax– the maximum value
in Y direction.
the minimum value in X
the maximum value in X
plot construction step.
The minimum amount of plot construction points := the window width
(in pixels) / dt
With the help of the ' Color
' button it is possible to set certain colors for every plot.